Pipe Fittings, PVC Hoses & Mats

About Us | Contact Us
About Us | Contact Us
About Us | GRP Pipes | GRE Pipes | Jacking Pipes | Manholes | Micro-Tunneling | Certificates | Contact Us
About Us | Plastic Bags | PP-R & HDPE Pipes | PVC Pipes | PP Tapes, Ropes & Sacks | Fittings & Mats | Glossary | Contact Us
About Us | Products | Online Showroom | Contact Us
About Us | Products | Certificates | Contact Us
About Us | Products | Contact Us
About Us | Products | Online Showroom | Projects | Contact Us
Gallery
Products

 

small logo

1. Pipe Fittings:

 

a. PP-R Pipe Fittings:

All types of fittings used for PP R Pipes are produced from our Injection Molding machine. Fittings like Tee, Elbows, Sockets, Reducers, Threaded adaptors etc. The sizes are available for 20mm to 63mm PP Pipes.

b. UPVC Fittings:

All types of UPVC fittings are molded by our state-of-the-art computerized injection molding machines. These UPVC fittings are used for pressure and drainage pipes. They cover Elbows, Tees, Couplers, Reducers, Threaded female / male adaptors, Bushes etc. For Pressure fittings and for drainage fittings we manufacture groove formed Tees, Elbows, Couplers, and also 110mm brackets & spacers for MOC, Kuwait.

We also specialize in the manufacturing of all types of fittings used for electrical conduit pipes such as Loop in boxes, 1, 2, 3, and 4 way circular junction boxes, terminal boxes, adaptors etc.

2. Soft PVC Hoses

In Kuwait we are the number one manufacturer of hoses in flexible form with braided reinforcement. Some of their applications are for gardening, irrigation, etc...

These hoses are manufactured in double layer from quality plasticized PVC compounds with polyester thread reinforced to accommodate pressure exerted by water as well as external loads.

We also manufacture transparent crystal clear hoses, with or without braiding reinforcement of polyester thread as per the demand.

All our hoses are available in Imperial standard in   ¼” , 3/8” , ½”,3/4” & 1” with standard thicknesses

The following table shows the size, thickness and wall thickness of double layered braided hoses:

Nominal Sizes

Inch

Wall thickness

mm

Standard length

1/2”

2.8

25 & 50 m

3/4”

3.0

25 & 50 m

1”

3.0

25 & 50 m

 

3. Mats

We are the only mats manufacturer in Kuwait. We supply high quality and well designed mats manufactured from polypropylene material in addition with the required master batches at the specified proportions to maintain a uniform color throughout the whole lengths and widths.

The standard sizes of the mats are 3' x 6', 6' x 9', 9' x 12', 12' x 12' and design and color suggested on request or according to our own designs.

 

About Us | Site Map | Contact Us | ©2009 Sulaiman Ahmed Al-Qudaibi & Sons Group

A Subsidiary of QDB Holding QDB Holding Logo


This website is best viewed with a resolution of 1024x768 pixels or higher